General Motors | GM6046M

Corrosion Protective Coatings Fluorocarbon Type

English 2005
0.000
Custom
Detailed Information

This specification covers the basic requirements for fluorocarbon post treatments. It is supplied in black color unless otherwise specified.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F1470
2009
English

STANDARD PRACTICE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION

Throughout this practice the terms detection and prevention apply to quality control systems. A brief description of both is provided to assist the purchaser in the application of this practice [...]
JIS
JIS B 1129
2004
English

Tapping screw washer assemblies with plain washers

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in accorda [...]
DIN
DIN 1479
1975
English

Turnbuckle Nuts Made from Hexagon Bar

Material: Steel of at least 350 N/mm2 (≈34 kp/mm2) tensile strength Steel of higher strengths or specified materials by agreement
ASTM
Abstract of ASTM F1137
1993
English

PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of corrosion protective coatings for fasteners. Grade I consists of a zinc phosphate coating with a supplemental protective [...]
JIS
JIS B 1054-2
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temp [...]
DIN
DIN 258
1977
English

Taper Pins with Thread Ends and Constant Taper Lengths

As part of the work of Technical Committee ISO/TC 2, ISO standards for parallel pins and taper pins have been drawn up which necessitated a general revision of existing DIN standards. In that p [...]
DIN
DIN 6918
1990
English

Square taper washers for high-strength structural bolting of steel channel sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.
DIN
DIN 7604
1992
English

Light-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are Intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 5 and 6. Such p [...]
DIN
DIN 913
1980
English

Hexagon socket set screws with flat point – ISO 4026 modified

ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.