DIN 582

Lifting Eye Nuts

English 1971
0.000
DIN
Detailed Information

Lifting eye nuts must always be tightened so that they bear solidly on the surface they contact. Loads at right angles to the plane of the eye are prohibited.
When a specific position in relation to an axis, edge or the like is specified for the lifting eye nut when screwed on, shims should be used if necessary in order to rule out unacceptable loading.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 427
1986
English

Slotted headless screws with chamfered end

This standard specifies the characteristics of M 1 to M 20 slotted headless screws with chamfered end. Where, for special applications, the screws are to meet requirements differing from those [...]
JIS
JIS B 0253
1985
English

Gauges for taper pipe threads

This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the "thread gauge", to be used for the dimensional inspection of the taper external thread [...]
ASTM
Abstract of ASTM A320/A320M
2000
English

ALLOY STEEL BOLTING MATERIALS FOR LOW TEMPERATURE SERVICE

1.1 This specification covers alloy steel bolting materials for pressure vessels, valves, flanges. and fittings for low temperature service. The term "bolting material" as used in this specific [...]
DIN EN
DIN EN 28741
1992
English

Half-length reverse taper grooved pins (ISO 8741 : 1986) English version of DIN EN 28 741

This International Standard specifies the characteristics of half-length reverse taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, w [...]
NASM
NASM 3213
1998
English

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

(a) SCREW: CORROSION-RESISTING STEEL (CRES) IN ACCORDANCE WITH MIL-S-82496. (b) 0-RING: FLUOROSILICONE RUBBER, COMPOSITION B IN ACCORDANCE WITH MIL-S-82496 (RESISTANT TO MIL-H-5606 HYDRAULIC FL [...]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to mee [...]
ISO
ISO 3800-1
1977
English

Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
DIN
DIN 522
1990
English

Metal washers – Technical delivery conditions

This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It does [...]