Abstract of ASTM F835

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

English 2000
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 in. thread sizes and flat countersunk (SFHCS) 0.060 through 1.5 in. thread sizes head cap screws having material properties for high strength requirements.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 548
1986
English

Round nuts with set pin holes in side

Round nuts with set pin holes in side are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electrical [...]
DIN
DIN 9021
1990
English

Large size washers

This standard specifies requirements for product grades A and C washers with a large outside diameter, i.e. washers with an outside diameter approximately equal to three times the nominal threa [...]
JIS
JIS B 1046
2005
English

Fasteners — Non-electrolytically applied zinc flake coatings

This Standard specifies requirements for thickness, corrosion resistance and mechanical and physical properties of non-electrolytically applied zinc flake coatings on steel fasteners with metri [...]
BS EN
BS EN 10025-1
2004
English

Hot rolled products of structural steels — Part 1: General technical delivery conditions

1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specif [...]
BS EN
BS EN 14399-6
2015
English

High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

This European Standard specifies, together with EN 1 4399-1 and EN 1 4399-2, hardened and tempered chamfered plain washers with chamfer intended for bolting assemblies with large series hexagon [...]
JIS
JIS B 0209-4
2001
English

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot -dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to JIS B 0205-3 having a basic profile acco [...]
DIN EN
DIN EN 28735
1992
English

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm [...]
DIN EN
DIN EN 28744
1992
English

Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744

This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metr [...]
DIN
DIN 74361-2
1982
English

Disc wheels for motor vehicles and trailers – Fasteners for stud centring

This standard specifies requirements for fasteners for stud-centred disc wheels on motor vehicles and trailers. Any necessary draft on the hexagon shall be within the tolerance on the width acr [...]