Abstract of ASTM F837M
STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]
English
1991
0.000
Detailed Information
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in applications requiring general corrosion resistance.
Download File
(Log in to download spec.)
Check out other specifications
1991
English
STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in applications requiring general corrosion resistance.
2000
English
Blind rivets — Mechanical testing
This Standard specifies the methods of mechanical testing execute under the ambient temperature of 10 °C to 35 °C of blind rivets (hereafter referred as “rivets”) including: — shear test (see clause 3), — tensile test (see clause 3), — mandrel head retention capability test (see clause 4) […]
1994
English
Curved spring lock washers
Spring lock washers as covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of a property class less than 8.8, as specified in DIN EN 20898-1. They are intended to counteract the effect of setting which results In bolt/nut […]
1992
English
Hexagon head bolts – Product grade C (ISO 4016 :1988) English version of DIN EN 24 016
This International Standard gives specifications for hexagon head bolts with threads from M5 up to and including M64 of product grade C. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing Interna […]
1998
English
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044: 1997, modified) English version of DIN EN 1664
This European Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with flange and threads from M5 up to M20 inclusive, in product grade A for threads up to and including M16 and product grade B for threads above M 16 and with property classes 8, 10 and 12.
1992
English
Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436
This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.