Abstract of ASTM F871M

ELECTRODE POSITED COATINGS ON METRIC THREADED COMPONENTS

English 1991
0.000
ASTM
Detailed Information

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fasteners and specifies coating thicknesses
as well as hydrogen embrittlement relief for high-strength and surface hardened fasteners.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7972
1970
English

Countersunk (Flat) Head Tapping Screws with Slot

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]
SAE
SAE J78
1998
English

Steel Self-Drilling Tapping Screws

1.1 General—This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general ap [...]
2.01
ISO
ISO 14579
2001
English

Hexalobular socket head cap screws

This International Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A.
JIS
JIS B 1042
1998
English

Fasteners—Surface discontinuities— Part 2 : Nuts

This Standard establishes limits for various types of surface discontinuities on nuts. It applies to nuts with — nominal thread diameters from 5 mm up to and including 39 mm; — product grade [...]
DIN
DIN 6330
1991
English

Hexagon nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in co [...]
ASTM
Abstract of ASTM A574M
1997
English

ALLOY STEEL SOCKET HEAD CAP SCREWS [METRIC)

1.1 This specification covers the requirements for quenched and tempered alloy steel socket head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
NASM
NASM 35307
1999
English

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated in Table I is based on 80,000 PSI Minimum Tensile Strength for diameters through .625 inch and 70,000 PSI Minimum T [...]
DIN
DIN 261
1987
English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649 [...]
DIN
DIN 50150
1976
English

Testing of Steel and Cast Steel – Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength

The conversion table In this Standard applies - to hardness values determined according to the following standards: ~DIN 50 103 Part 1 and Part 2 (Rockwell) ~DIN 50 133 Part 1 (Vickers) and ~DI [...]