DIN 553
Slotted Set Screws with Cone End
English
1972
0.000
Detailed Information
In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M 1.8 and M 2.5 have been included. The sizes M 1.7, M 2.3 and M 2.6 have been barred for new designs.

Download File
(Log in to download spec.)
Check out other specifications
2018
English
Fasteners — Electroplated coating systems
This document specifies requirements for electroplated coatings and coating systems on steel fasteners. The requirements related to dimensional properties also apply to fasteners made of copper or copper alloys. It also specifies requirements and gives recommendations to minimize the risk of hyd...
1999
English
RIVET-TUBULAR, OVAL HEAD
DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIVETS 49,000 PSI MIN. COPPER RIVETS 24,000 PSI MIN. CORROSION RESISTANT STEEL RIVETS 65,000 PSI MIN.
2010
English
HEX CAP SCREWS, BOLTS, AND STUDS, STEEL, HEAT TREATED, 120/105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE
1.1 This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 1-1/2 in.; and 90 ksi for diameters 1-3/4 in. to 3.0 in. inclusive. The term “fasteners"...
2010
English
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit deviations EI...
2015
English
Cathodically protective surface treatment with friction requirement Y 1000
Surface treatment Y 1000 covers different surface treatment classes. The class of the treated component is determined by the relevant requirements for finish and environment. This standard covers coatings free from hexavalent chromium for corrosion protection of threaded iron and steel parts wit...
2014
English
Fasteners — Non-electrolytically applied zinc flake coatings
This International Standard specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings: — with or without hexavalent chromium; — with or without top coat; — with or without lubricant (integral lubricant and/or subsequently added lubrica...