ASTM F871M

Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]

English 1998
0.000
ASTM
Detailed Information

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fasteners and specifies coating thicknesses as well as hydrogen embrittlement relief for high-strength and surface hardened fasteners.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 898-7
1992
English

Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accord [...]
JIS
JIS B 1010
2003
English

Designation system for fasteners

This Standard specifies a system for the designation of fasteners in product standards.
JIS
JIS B 1087
2000
English

Blind rivets — Mechanical testing

This Standard specifies the methods of mechanical testing execute under the ambient temperature of 10 °C to 35 °C of blind rivets (hereafter referred as “rivets”) including: — shear test (see c [...]
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together [...]
JIS
JIS B 0123
1999
English

Designation system for screw threads

This Japanese Industrial Standard specifies designation for screw threads used in the Standards referring the principle of screw thread and the Standards referring the products having screw thread.
ANSI
ANSI B18.2.4.6M
1990
English

METRIC HEAVY HEX NUTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 925
1986
English

Slotted countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
JIS
JIS B 0101
1994
English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw th [...]
DIN
DIN 127
1987
English

Spring lock washers with square ends or tang ends

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 [...]