DIN EN 22338
Unhardened parallel pins (ISO 2338 : 1986) English version of DIN EN 22 338
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of unhardened parallel pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1992
English
Hexagon thin nuts – Product grade B (unchamfered) (ISO 4036 :1979) English version of DIN EN 24 036
This International Standard gives specifications for hexagon thin nuts with metric dimensions and thread diameters from 1,6 up to and including 10 mm and product grade B. If, in special cases, specifications other than those listed in this International Standard are required, they should […]
1992
English
Hexagon head bolts – Product grade C (ISO 4016 :1988) English version of DIN EN 24 016
This International Standard gives specifications for hexagon head bolts with threads from M5 up to and including M64 of product grade C. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing Interna […]
2005
English
SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES
This procedure is used to test and evaluate the resistance of fastener surface finishes to laboratory salt spray testing.
1986
English
Slotted raised countersunk head screws with full dog point
The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April1968 edition, has been replaced by product grade F as specified in DIN 267 Par […]