DIN EN 24034

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

English 1992

0.000

Detailed Information

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.

Download File

(Log in to download spec.)

Check out other specifications

ISO

ISO 898-1

2009

English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — the term used when bolts, screws and studs are considered all together — that conform to the...

DIN

DIN 925

1986

English

Slotted countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and ...

Others

IS 1367-2

2002

English

TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 2 TOLERANCES FOR FASTENERS — BOLTS, SCREWS, STUDS AND NUTS — PRODUCT GRADES A, B AND C

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A. The tolerances, except tolerances for threads, are selected from the system of limits and fits speci...

DIN

DIN 74361-3

1979

English

Disc wheels for motor vehicles and trailers – Dimensions and fasteners for attachment with centring on wheel bore

This standard specifies requirements for the attachment of disc wheels with 15° tapered rims as covered in DIN 78 022, on commercial vehicles and trailers. Design-related details left unspecified, such as shape of wheel disc and connection between rim and wheel disc, are to be selected as approp...

JIS

JIS B 0147

2004

English

Blind rivets—Terminology and definitions

This Standard specifies the terminology and definitions for types, performance characteristics and geometry for blind rivets and the terminology for blind rivet setting and setting equipment used generally in blind riveting.

ASME

ASME B18.2.1

1996

English

SQUARE AND HEX BOLTS AND SCREWS (INCH SERIES)

This standard covers the complete general and dimensional data for eight product types of inch series square and hex bolts and screws recognized as American National Standard. Also included are appendixes covering thread runout sleeve gages, gaging procedure for checking bolt and screw straightne...