DIN EN 28750
Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1995
English
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
1.1 This specification covers steel rivets for use in boilers and pressure vessels and steel bars for use in the manufacture of rivets. 1.2 Two grades are covered: 1.2.1 Grade A-Bars having a yield point of 23 000 psi (160 MPa) minimum with no controls on carbon content. 1.2.2 Grade B-Bars havin...
2008
English
SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)
This Standard covers the general, dimensional, and mechanical performance requirements for low strength carbon steel, case hardened, regular and large serrated flange locknuts (inch series), recognized as American National Standard.
1995
English
Square head set screws
This Japanese Industrial Standard specifies the steel square head set screws (hereafter referred to as "steel set screws") and stainless steel square head set screws (hereafter referred to as "stainless steel set screws") for general use.
2016
English
Designation systems for steels Part 1: Steel names
This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, so as to provide an abbreviated identification of steels.
1983
English
Hexagon nuts with flange
This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property classes, th...
1998
English
Prevailing torque type all-metal hexagon nuts with flange, with metric fine pitch thread (ISO 12126: 1997, modified) English version of DIN EN 1667
This European Standard specifies the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for sizes d up to and including 16 mm and product grade B for size...