DIN EN 28752

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

English 1993
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM A449
2010
English

HEX CAP SCREWS, BOLTS, AND STUDS, STEEL, HEAT TREATED, 120/105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE

1.1 This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 1-1/2 in.; and 90 ksi for diameters 1-3/4 in. to 3.0 in. inclusive. The term “fa […]
DIN
DIN 6434
1984
English

Rivet sets

This standard specifies requirements and technical delivery conditions for rivet sets intended to be used with DIN 660, DIN 661, DIN 662 and DIN 674 rivets.
DIN
DIN 1435
1977
German

Bolzen mit kleinem Kopf, Ausführung mg

Bolzen nach dieser Norm sind nur für Ersatzlieferungen bestimmt, Für Neukonstruktionen sind Bolzen nach DIN 1444 zu verwenden.
DIN
DIN 6917
1989
English

Square taper washers for high-strength structural bolting of steel I sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel I sections in accordance with DIN 18 800 Part 1, together with DIN 6914 screws and DIN 6915 nuts.
ASTM
Abstract of ASTM A394
2000
English

STEEL TRANSMISSION TOWER BOLTS, ZINC COATED AND BARE

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc coated steel bolts and atmospheric corrosion resistant bolts , in nominal thread diameters of 1/2, 5/8, 3/4, 7/8 and 1 in. for use in the construction of transmission towers, substations […]
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8, 9.8, 10.9 and A2-70.