DIN EN 28735
Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
2004
English
Parallel screw thread gauges— Measuring method of gauges
This Japanese Industrial Standard specifies measuring method of screw thread plug gauges and ring gauges (hereafter referred to as “thread gauges”) among limit gauges for parallel screw threads having single-start thread with symmetrical ridge defined in JIS B 0251, JIS B 0254 or JIS B 0255 and o...
1983
English
Plain washers for metric bolts, screws and nuts – General plan
This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. This International Standard does not apply to washers for preassembled bolts and screws as far as the ho...
1991
English
Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)
1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - nominal thread diameters 5 mm and larger; - product grades A and B; - property classes up to and including 1...
1997
English
HYDROGEN EMBRITTLEMENT RISK MANAGEMENT
This technical update provides a review of concepts to manage and minimize the risk of hydrogen embrittlement in electroplated screws. These concepts do not assure elimination of failure resulting from hydrogen embrittlement, but seek to manage that risk through minimization and setting forth tho...
2004
English
Hexalobular socket head cap screws
This Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing...
2008
English
ALLOY STEEL SOCKET-HEAD CAP SCREWS
1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are includ...