Check out other specifications
1961
English
Rod Ends and Clevis Pins
The following publications form a part of the specification to the extend specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply. SAE J1010-Emission Control Hose SAE J1111-Component Nomenclature-Skidder-Grapple
1990
English
METRIC HEAVY HEX NUTS
1.1 This standard covers the complete general and dimensional data for metric heavy hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described herein...
1970
English
Spring Lock Washers Barbed or Plain with Rectangular Cross-section
The surface of the spring lock washers must be smooth and free from scale and burr. The spring lock washers must be coiled without kinks and their outer edges must be sharp or at the most lightly rounded. The spring lock washers are to be supplied lightly greased. Subject to agreement, they may ...
1991
English
Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2
1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wide flats, — hot or cold rolled sheet/plate and strip, — hammer and drop forgings (see note 2), manufactur...
1999
English
Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C
This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Deviations from the tolerances specified in t...
1977
English
Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods
This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.