DIN 675
Flat countersunk head rivets with nominal diameters from 3 to 5 mm
English
1993
0.000
Detailed Information
This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal flat countersunk head rivets with nominal diameters from 3 to 5 mm.
Download File
(Log in to download spec.)
Check out other specifications
1997
English
THREAD ROLLING TAPPING SCREWS
This standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities beyond those normally expected of other standard types of tapping screws.) Note: The performance requiremen...
1974
English
Tangential keys and Tangential Keyways for Constant Loads
The present Standard corresponds in subatanct to the ISO Draft lSO/DIS 3117-1973 Tagential keying Clavetage par clavettes tangentielles As compared with the April 1924 lssue of DIN 271, the following amendments and additions should be noted: a) The shaft diameters were partly changed to conform t...
1969
English
RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)
This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.
2009
English
WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)
This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), and plain washers (# 0 through 3 in.).
2008
English
STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS
This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation ...
1990
English
Square taper washers for high-strength structural bolting of steel channel sections
Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.