Check out other specifications
1992
English
Hexagon socket screw plugs
This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, or ISO 228 Part 1. Such plugs may be used together with seal rings as specified in DIN 7603, type an […]
2000
English
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A. NOTE The product grades refer to the size of the tolerances where grade A is the most precise […]
1984
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Oberflächenfehler an Schrauben
Diese Norm ergänzt DIN 267 Teil 1 und Teil 2 sowie DIN ISO 898 Teil 1 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfehlern an Schrauben mit Festigkeitsklassen nach DIN ISO 898 Teil 1, in Produktklassen A (Ausführun […]
2004
English
Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Ta […]
1984
French
RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS
La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement utilisées avec des vis à métaux de grade A ou B, de diamètre 3 à 20 mm, de classes de qualité 6.8 et 8 […]
1994
English
Screw threads and fasteners — Vocabulary
This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw threads to be used generally.