DIN 7603
Ring seals and gaskets
English
2001
0.000
Detailed Information
This standard specifies dimensions and materials for ring seals and flat or filled gaskets designed for use with compression couplings (e.g. as specified in DIN 3850 or DIN 7601) or pipe plugs (as specified in DIN 908).
Download File
(Log in to download spec.)
Check out other specifications
1987
English
Prevailing torque type hexagon domed cap nuts with nonmetallic insert
This standard specifies requirements for M 4 to M 20 prevailing torque type hexagon domed cap nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for size M 20. If, in special cases, nuts are to comply with specifications other than those given in th...
1967
English
Hexagon Screws – Thread Approximately to Head – Metric Thread Type g
These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they are in wide demand. As far as the other sizes are concerned, the customer may have to reckon with long deliv...
1995
English
Self-drilling tapping screws – Dimensions, requirements and testing
This standard specifies dimensions. requirements and test methods for heat-treated self-drilling tapping screws ('tapping screws' for short). These screws have a drill point with which they form a pilot hole during assembly, followed by a threaded section with which they form their mating thread,...
1989
English
Steel stampings – General tolerances
This standard is intended to simplify drawings. It specifies general tolerances on linear and angular dimensions and on coaxiality and symmetry in four accuracy grades comprising f (fine), m(medium), g (coarse) and sg (very coarse). When selecting a defined accuracy grade, the respective workshop...
2000
English
Hexagon socket button head screws
Introduction This Japanese Industrial Standard has been prepared based on ISO 7380 Hexagon socket button head screws issued in 1997 as the second edition without changing the technical contents. The portions underlined with dots in this Standard are not stated in the original International Stand...
1988
English
Hexagon head screws with metric fine pitch thread – Product grades A and B
This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is shorter, a...