DIN 6916
Round washers for high-strength structural steel bolting
English
1989
0.000
Detailed Information
The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with
DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
Download File
(Log in to download spec.)
Check out other specifications
1983
English
Square weld nuts
The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been raised (see DIN ISO 898 Part 2), the nut heights also being recalculated (see DIN 970). It turned out t […]
1992
English
Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744
This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to […]
1986
English
Slotted capstan screws
Slotted capstan screws may be used both as fastening and adjusting screws. They are primarily designed for use in electrical engineering and may be tightened by means of a sliding tee bar where it is not possible to use a screwdriver. Locking wires are often attached to the cross holes fo […]
1983
English
Prevailing torque type hexagon nuts with flange and with non-metallic insert
This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert, with metric thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this […]
1992
English
ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS [METRIC]
1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws M3 through M20 thread sizes having material properties of ISO 898/1 Property Class 12.9. 1.2 Fasteners meeting this specification […]
1995
English
Tapping screws—Mechanical properties
This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together with the corresponding test methods.