Check out other specifications
1991
English
Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M 1.6 through M 36 and intended for use in applications requiring general corrosion resistance. 1.2 Two groups of stainless steel alloys are covered,...
1981
English
Specification for ISO metric screw threads — Part 1: Principles and basic data
This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 mm to 300 mm diameter threads is tabulated and Appendix B is included giving the information necessary to cal...
3.01
1997
English
Standard Specification for Alloy Steel Socket Set Screws [Metric]
1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.
2001
English
Fasteners—Electroplated coatings
This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners. This Standa...
1986
English
Slotted raised countersunk (oval) head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g has been replaced by product grade C. c) The content of the standar...
