Check out other specifications
2001
English
Standard Classification System for Rubber Products in Automotive Applications
1.1 This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. 1.2 This classification system is ba...
2007
English
STEEL SELF-DRILLING TAPPING SCREWS
1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ensure that self-drilling tapping screws, by meeting the mechanical and performance requirements specified,...
1981
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Aufweitversuch für Muttern
1 Geltungsbereich Diese Norm ergänzt DIN 267 Teil 1 und Teil 4, sowie DIN lSO 898 Teil 2 und enthält Festlegungen über einen Aufweitversuch für Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 und DIN 267 Teil 4 mit Gewindedurchmessern von 3 bis 39 mm. 2 Zweck Der Aufweitversuch nach diese...
1983
English
ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes
This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum dimension and by R min = 0,125P ≈ H/7 for the minimum dimension of the minor diameter d3, as specified in...
1993
English
METRIC HEX FLANGE NUTS
1.1 This standard covers the complete general and dimensional data for metric hex flange nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described herei...
1982
English
Round plain head nails for use in automatic nailing machines
This standard specifies requirements for round plain head nails for use in automatic nailing machines.