DIN 6917

Square taper washers for high-strength structural bolting of steel I sections

English 1989
0.000
DIN
Detailed Information

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel I sections in accordance with DIN 18 800 Part 1, together with DIN 6914 screws and DIN 6915 nuts.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 887
1983
English

Plain washers for metric bolts, screws and nuts – General plan

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. [...]
ISO
ISO 4759-2
1979
English

Tolerances for fasteners – Part II: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics

This International Standard specifies the selection of tolerances for use in the preparation of ISO product standards for bolts, screws and nuts with thread diameters from 1 up to and including [...]
JIS
JIS B 2804
2001
English

Retaining rings

This Japanese Industrial Standard specifies retaining rings, which are generally used on a shaft or in a bore, of the following shapes: a) C-type retaining ring, of which the shape is like a le [...]
DIN
DIN 961
1990
English

M8 x 1 to M52 x 3 hexagon head bolts with fine pitch thread – Product grades A and B

This standard specifies requirements for M8 to M52 hexagon head bolts threaded up to the head. with metric fine pitch thread, assigned to product grade A for sizes up to M24 and lengths not exc [...]
ASME
ASME B18.6.8
2010
English

THUMB SCREWS AND WING SCREWS (INCH SERIES)

This Standard covers the general and dimensional data for the various types of thumb screws and wing screws recognized as standard.
JIS
JIS B 0176-3
2002
English

Threading tools—Vocabulary Part 3 : Chaser

This part of JIS B 0176 specifies terms and definitions related to the chaser to be used mainly for metal workings in general.
DIN
Beiblatt 1 zu DIN 267 Teil 2
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben

In den nachfolgenden Bildtafeln sind - nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet - die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Tei [...]
DIN
DIN 1469
1978
English

Grooved Pins, Half Length Grooved with Gorge

Grooved pins according to this Standard are positive or non-positive connecting elements. They are used for holding retaining rings, retaining washers, springs, etc., the grooved pin being seat [...]
JIS
JIS B 0002-2
1998
English

Technical drawings — Screw threads and threaded parts — Part 2 : Screw thread inserts

This part of JIS B 0002 specifies methods for the representation of screw thread inserts on technical drawings.