DIN 7992

T-head Bolts with Large Head

English 1970
0.000
DIN
Detailed Information

Technical conditions of delivery according to DIN 267

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-4
1983
English

Fasteners – Technical delivery conditions – Property classes for nuts (previous classes)

DIN 267 Part 4 was converted to the international property classes for nuts in 1967. The previous symbols 4D, 5D, 5S, 6G, 6S and 8G were replaced by code numbers 4, 5, 6, 8, 10, 12 and 14 where [...]
ISO
ISO 4042
2018
English

Fasteners — Electroplated coating systems

This document specifies requirements for electroplated coatings and coating systems on steel fasteners. The requirements related to dimensional properties also apply to fasteners made of copper [...]
MIL
MIL-DTL-13924D
1999
English

COATING, OXIDE, BLACK, FOR FERROUS METALS

This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary [...]
ISO
ISO 5864
1978
English

ISO inch screw threads – Allowances and tolerances

This International Standard specifies a system of allowances and tolerances for standard thread series, covering the range of diameters from 0.06 to 6 in, and pitches from 80 to 4 threads per inch.
DIN
DIN 7967
1970
English

Self Locking Counter Nuts

When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
DIN
DIN 522
1990
English

Metal washers – Technical delivery conditions

This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It does [...]
ASTM
ASTM A502
1993
English

Standard Specification for Steel Structural Rivets

1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 1 1/2 in. ( 13 to 38 mm), inclusive, for structural fabricating purposes. The grades are as follows: 1.1.1 Gr [...]
DIN
DIN 1157
1973
English

Decorator’s tacks

Decorator's tacks shall be made of steel (grade at manufacturer's discretion) and have a bright (bk) or blue annealed (bl g) finish.
JIS
JIS B 0255
1998
English

Limit gauges for unified screw threads

This Japanese Industrial Standard specifies the limit gauges to be used for the dimensional inspection of metric screw threads specified in JIS B 0210 and JIS B 0212 (hereafter referred to as “ [...]