DIN 7981

Pan Head Tapping Screws with Recessed Head

English 1970
0.000
DIN
Detailed Information

Bracketed nominal diameters should be avoided wherever possible.

Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data.

Technical conditions of delivery and material according to DIN 267 Sheet 12.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 2804
2001
English

Retaining rings

This Japanese Industrial Standard specifies retaining rings, which are generally used on a shaft or in a bore, of the following shapes: a) C-type retaining ring, of which the shape is like a le [...]
Others
MPIF 35
2016
English

Materials Standards for Metal Injection Molded Parts

MPIF Standard 35 is issued to provide the design and materials engineer with the information necessary for specifying powder metal (PM) materials that have been developed by the PM parts manufa [...]
JIS
JIS B 1081
1997
English

Threaded fasteners— Axial load fatigue testing— Test methods and evaluation of results

This Japanese Industrial Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless [...]
ASTM
Abstract of ASTM F871M
1991
English

ELECTRODE POSITED COATINGS ON METRIC THREADED COMPONENTS

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fast [...]
DIN
DIN 186
1988
English

T-head bolts with square neck

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specif [...]
ASTM
ASTM F912
2004
English

ALLOY STEEL SOCKET SET SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000-in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws [...]
DIN
DIN 7346
1978
English

Spring-Type Straight Pins (Roll Pins) Light-weight Type

Spring-type straight pins (also known as roll pins) to this Standard are pins made of spring steel, rolled from strip and having a slot along their length and one or two chamfers to permit inse [...]
ASTM
ASTM F1941
2010
English

ELECTRODEPOSITED COATINGS ON THREADED FASTENERS (UNIFIED INCH SCREW THREADS (UN/UNR))

This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with unified inch screw threads. It specifies coating thickne [...]
ASTM
Abstract of ASTM F436M
1993
English

HARDENED STEEL WASHERS [METRIC]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]