DIN 7985
Cross recessed raised cheese head screws
English
1990
0.000
Detailed Information
This standard specifies requirements for M1,6 to M10 cross recessed raised cheese head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special features of fasteners.
Download File
(Log in to download spec.)
Check out other specifications
1993
English
Fasteners—Surface discontinuities— Part 3 : Bolts, screws and studs for special requirements
This Standard establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts, screws and studs with — nominal thread diameters 5 mm and larger; — product grades A and B; — nominal lengths l ≤ 10d (or longer if specified)...
2005
English
Corrosion Protective Coatings Phosphate/Electro-Organic
This specification covers the basic requirements for a black corrosion protective coating which is produced by the use of the bulk electrodeposition process or, if the parts do not lend themselves to barrel processing, the parts may be racked prior to the electrodeposition process. The process in...
2008
English
PULL THROUGH MANDREL BLIND RIVETS
This standard establishes the dimensional, mechanical, and performance requirements for inch series pull through mandrel blind rivets suitable for use in engineering assemblies where load transmitting capability by the rivet is a design requirement. A metric series counterpart standard is in exis...
1996
English
SQUARE AND HEX BOLTS AND SCREWS (INCH SERIES)
This standard covers the complete general and dimensional data for eight product types of inch series square and hex bolts and screws recognized as American National Standard. Also included are appendixes covering thread runout sleeve gages, gaging procedure for checking bolt and screw straightne...