JIS B 0101
Screw threads and fasteners — Vocabulary
English
1994
0.000
Detailed Information
This Japanese Industrial Standard specifies the terms and definitions related to the “fundamentals of screw thread” and “threaded fasteners (including washers, pins and rivets)” of the screw threads to be used generally.
Download File
(Log in to download spec.)
Check out other specifications
1995
English
Studs – with a length of engagement equal to about 1 d
This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo (‘without interference-fit thread’) or Sn4.
1997
English
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric bolts, screws, and studs with nominal thread diameters M1.6 through M36, and intended for use in engineering applications requiring general corrosion resistance. 1.2 Eight groups of stainless steel a...
1981
English
Bright round steel – Dimensions Permissible deviations – according to ISO tolerance zone h9
This standard applies to bright round steel of nominal diameters from 1 to 150 mm, made of the steels listed in clause 5. Details as to finish and lengths to be delivered are given in clause 6.
1988
English
Hexagon head bolts with metric fine pitch thread – Product grades A and B
This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is shorter, ...