JIS B 0205-2
ISO general purpose metric screw threads — Part 2: General plan
English
2001
0.000
Detailed Information
This Standard specifies ISO general purpose metric screw threads (M) having basic profile according to JIS B 0205-1. Basic dimensions are given in JIS B 0205- 4. For tolerances see JIS B 0209-1.
Download File
(Log in to download spec.)
Check out other specifications
2010
English
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1⁄4 through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range 1⁄4 in. and M6 nominal and above. These nuts are intended for hig...
2000
English
Hexagon weld nuts
This standard specifies requirements for sizes M3 to M16 coarse and fine pitch thread hexagon weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1. Hexagon weld nuts with flange are specified in DIN 977.
1997
English
ALLOY STEEL SOCKET SET SCREWS [METRIC]
1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M 1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 Property Class 45H.
2008
English
GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES
All UN, UNJ, M, and MJ thread form gages shall be calibrated using the commonly accepted metrology techniques described in this standard using properly maintained standard metrology equipment. The practices described in this standard are minimum calibration requirements. If alternative calibratio...
2004
English
ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS
1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 thread sizes and flat countersunk (SFHCS) 0.060 through 1.5 thread sizes head cap screws having material properties for high-strength requirements. 1.2 Fasteners...
1986
English
Cross recesses for screws
This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, hereinafter referred to as the "cross recess".