JIS B 0208

Unified fine screw threads

English 1978
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the basic profile, formulas and basic dimensions for unified fine screw threads used for aircrafts and other purposes of limited necessity.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 86102
1965
English

Screwed Ends, Tapped Holes for Pipe Unions, Armatures and Plugs with Whitworth Pipe Thread – Design Sheet for Shipbuilding

This Standard contains a selection from DIN 3852 Sheet 2 for the shipbuilding industry with some diverging or complementary data.
DIN
DIN 1448-1
1970
English

Conical Shaft Ends – with External Thread – Dimensions

For connection with ISO Recommendation ISO/R 775-1969, see Explanations. Conical shaft ends are intended to take belt pulleys, couplings and gears. Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.
5.01
DIN
DIN 71412
1987
German

Kegelschmiernippel

Der Kegelschmiernippel eignet sich zum Abschmieren mit Handschmierpressen wie auch kraftbetätigten Schmierpressen. Die Verbindung mit dem Greifmundstück der Schmierpresse ist formschlüssig, dadurch sind auch Abschmiervorgänge ohne Anpreßdruck aus der Schräglage heraus an schwer zugänglichen Schmi...
DIN
DIN 1587
2000
English

Hexagon domed cap nuts

This standard specifies dimensions and technical delivery conditions for sizes M4 to M24 coarse and fine pitch thread hexagon domed cap nuts of product grades A and B.
ISO
ISO 725
1978
English

ISO inch screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in inches, of ISO inch screw threads according to ISO 263, ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6 in. The values refer to the basic profile according to ISO 68, ISO gener...
JIS
JIS B 1022
1999
English

Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C

This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Deviations from the tolerances specified in t...