JIS B 1054-3

Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 3 : Set screws and similar fasteners not under tensile stress

English 2001
0.000
JIS
Detailed Information

This part of JIS B 1054 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures.

Download File
(Log in to download spec.)

Check out other specifications

ANSI ASME
Abstract of ANSI/ASME B1.7M
2001
English

NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS FOR SCREW THREADS

1. ANSI/ASME B1.7M is a standard developed through the procedures of The American Society of Mechanical Engineers. B1.7M is under the jurisdiction of ASME Standards Committee B1. 2. B1.7M establishes uniform practices for standard screw threads with regard to screw thread nomenclature and […]
JIS
JIS B 1013
1994
English

Countersunk head screws— Head configuration and gauging

This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the respective product standards.
DIN
DIN 8188
1984
English

American type roller chains

This standard specifies dimensions and technical delivery conditions for American type roller chains which, together with their associated chain wheels, are predominantly used as power transmission elements between two or more shafts.
JIS
JIS B 1054-2
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures.
JIS
JIS B 1005
2003
English

General purpose bolts and screws — Metric series — Radii under the head

This Standard specifies the sizes of the radii under the head and the transition diameters of metric series general purpose bolts and screws.
ASTM
Abstract of ASTM B766
1998
English

ELECTRODEPOSITED COATINGS OF CADMIUM

1.1 This specification covers the requirements for electrode posited cadmium coatings on products of iron, steel, and other metals. NOTE 1 - Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass, beryllium copper, copp […]