JIS B 1055

Tapping screws—Mechanical properties

English 1995
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together with the corresponding test methods.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 5418
1993
English

Mounting dimensions of rolling bearings

This standard gives design details of shoulders of shafts and housings, in or on which rolling bearings are to be seated. Compliance with the values specified precludes distortion of the bearin [...]
ISO
ISO 1302
2002
English

Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphica [...]
MIL
MIL-DTL-1222J
2000
English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, [...]
DIN
DIN 6340
1987
English

Washers for clamping devices

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the spe [...]
ISO
ISO 2903
1977
English

ISO metric trapezoidal screw threads – Tolerances

This International Standard specifies a tolerance system for metric trapezoidal screw threads according to ISO 2902. The tolerances refer to the basic profile according to ISO 2901. The tolera [...]
DIN
DIN 1691
1985
English

Flake graphite cast iron (grey cast iron) Properties

In conjunction with the general technical delivery conditions specified in DIN 1690 Part 1, this standard specifies the properties of carbon and low alloy flake graphite cast iron (grey cast ir [...]
DIN
DIN 7331
1993
English

Compression rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provided w [...]
JIS
JIS B 0143
1985
English

Symbols and designations of dimensions for threaded fasteners

This Japanese Industrial Standard specifies designations of dimensions for threaded fasteners such as bolts, machine screws, nuts, and symbols for indicating them, hereinafter referred to as th [...]
DIN EN
DIN EN 22339
1992
English

Unhardened taper pins (ISO 2339 : 1986) English version of DIN EN 22 339

This International Standard specifies the characteristics of unhardened taper pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.