JIS B 1099

Fasteners — General requirements for bolts, screws, studs and nuts

English 2005
0.000
JIS
Detailed Information

This Standard specifies the general requirements for standardized bolts, screws, studs and nuts. It refers to the Standards on tolerances, mechanical and performance characteristics, geometrical features, surface discontinuities, surface finishes and quality aspects.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F880
2008
English

STAINLESS STEEL SOCKET-SET SCREWS

1.1 This specification covers the requirements for austenitic grade stainless steel socket-set screws (SSS) sizes 0.060 through 0.500 in., in two conditions, AF and CW. 1.2 Units一The values s [...]
DIN
DIN 434
1990
English

Square taper washers for use with channel sections

Washers as specified in this standard are intended for use in structural bolting of channel sections using bolts up to property class 5.6.
DIN
DIN 526
1973
English

Safety Cups for Cheese Head Screws according to DIN 84

Material: St 1303 according to DIN 1623 or St 3 according to DIN 1624 at manufacturer’s choice Finish: without burr
ASTM
ASTM D610
2008
English

Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

1.1 This practice covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of rusting given in the written specifications form p [...]
DIN
DIN 529
1986
English

Masonry and foundation bolts

This standard specifies the characteristics of M 8 to M 72 X 6 masonry and foundation bolts. They are designed for use in masonry, concrete foundations and the like. The shape of the shank is o [...]
ASTM
ASTM F593
2008
English

STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS

This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended [...]
ASME ANSI
ASME/ANSI B18.3.4M
1993
English

METRIC HEXAGON SOCKET BUTTON HEAD CAP SCREWS

1.1.1 This standard contains the complete general and dimensional requirements for metric series hexagon socket button head cap screws of nominal sizes from 3 mm to 16 mm recognized as an Ameri [...]
DIN
DIN 436
1990
English

Square washers for use in timber constructions

This standard specifies requirements for product grade C washers. The preferred application of these washers is in bolt/nut assemblies in timber constructions.
ISO
ISO 7378
1983
English

Fasteners – Bolts, screws and studs – Split pin holes and wire holes

This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriat [...]