ASME B1.20.5
GAGING FOR DRYSEAL PIPE THREADS (INCH)
English
2004
0.000
Detailed Information
The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inches unless otherwise specified.
Download File
(Log in to download spec.)
Check out other specifications
1998
English
Prevailing torque type all-metal hexagon nuts with flange, with metric fine pitch thread (ISO 12126: 1997, modified) English version of DIN EN 1667
This European Standard specifies the characteristics of prevailing torque type all metal hexagon nuts with flange and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for sizes d up to and including 16 mm and product grade B for size...
2002
English
UNIFIED INCH SCREW THREADS (UN AND UNR THREAD FORM)
This standard specifies the thread form, series, class, allowance, tolerance, and designation for Unified screw threads. (In order to emphasize that Unified screw threads are based on inch modules, they may be denoted Unified inch screw threads.) Several variations in thread form have been develo...
1992
English
Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1
This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.
5.01
1998
English
Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation
This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see JIS B 0002...
1987
English
Prevailing torque type all-metal hexagon nuts
This standard specifies requirements for M 3 to M 36 prevailing torque type all-metal hexagon nuts assigned to product grade A (for sizes up to M 16) and product grade B (for sizes over M 16). If, in special cases, nuts are to comply with specifications other than those given in this standard, e...