JIS B 1119
Machine screws and nuts for spectacle frames
English
1995
0.000
Detailed Information
This Japanese Industrial Standard specifies the machine screws made of stainless steel, brass, and nickel silver (hereafter referred to as “machine screws”) as well as the nuts made of nickel silver.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
Screw and washer assemblies – Coarse threaded screws with captive conical spring washer
This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a captive conical spring washer. Wave spring washers are intended to counteract loosening of bolt […]
1990
English
Serrated lock washers with external teeth for screw and washer assemblies
Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provide electric contact between components coated with varnish, anti-corrosive agents or similar materia […]
1999
English
RIVET-TUBULAR, OVAL HEAD
DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIVETS 49,000 PSI MIN. COPPER RIVETS 24,000 PSI MIN. CORROSION RESISTANT STEEL RIVETS 65,000 PSI MIN.
1996
English
PLOW BOLTS (INCH SERIES)
1.2.1 This standard recommends Table 1, No. 3 square neck, 80 deg round countersunk head and Table 2, No. 7 reverse key, 60 deg round countersunk head plow bolts for new designs. It includes No. 3 square neck, round countersunk repair head; Table 3, No. 4 countersunk, square repair head; […]
1982
English
Pipe nuts with thread in accordance with DIN ISO 228 Part 1
This standard gives specifications for (hexagon and octagon) pipe nuts with thread in accordance with DIN ISO 228 Part 1 of nominal sizes G 1/8 up to and including G 6, assigned to product grades B and C (previously designs mg and g). If, in special cases, nuts are to comply with specifi […]