Check out other specifications
2001
English
T-Slot nuts
Introduction This revision has been made for formal modification resulting from the revision of JIS B 1052 on January 20, 1998 and the withdrawal of Annex 3 to JIS B 1052 on December 31, 2000 to have resulted in the specification given in the Annex 2 to JIS B 1181. 1 Scope This Japanese Industri...
1970
English
Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)
Intermediate length should as for as possible be avoided. Lengths over 100 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quoted weight. If the screws are to be supplied with captive washer components, an addition is made to the de...
1973
English
Limits of sizes and tolerances for unified coarse screw threads
This Japanese Industrial Standard specifies limits of sizes and tolerances for unified coarse screw threads specified in JIS B 0206-Unified Coarse Screw Threads, mainly used for the purpose of fastening .
2002
English
SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS
This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs. including heat treated machine screws, tapping screws, and SEMS (the washers of screw-washer assemblies are excluded)....