ASME B1.20.5

GAGING FOR DRYSEAL PIPE THREADS (INCH)

English 2004

0.000

Detailed Information

The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inches unless otherwise specified.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 267-19

1984

German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Oberflächenfehler an Schrauben

Diese Norm ergänzt DIN 267 Teil 1 und Teil 2 sowie DIN ISO 898 Teil 1 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfehlern an Schrauben mit Festigkeitsklassen nach DIN ISO 898 Teil 1, in Produktklassen A (Ausführun […]

DIN EN

DIN EN 1665

1998

English

Hexagon bolts with flange – Heavy series – English version of DIN EN 1665

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.

BS EN

BS EN 20898-2

1994

English

Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread

This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lower temperature.

ASME ANSI

ASME/ANSI B18.3.2M

1990

English

METRIC HEXAGON KEYS AND BITS

1.1.1 This standard contains the complete dimensional, mechanical and performance requirements for metric series hexagon keys and bits of nominal sizes from 0.7 mm to 36 mm recognized as "American National Standard." They are primarily intended to be used for tightening and loosening metr […]

ISO

ISO 4775

1984

English

Hexagon nuts for high-strength structural bolting with large width across flats – Product grade B – Property classes 8 and 10

This International Standard gives specifications for large series hexagon, high-strength structural nuts with metric dimensions in property classes 8 and 10 and thread sizes from M12 up to and including M36 for use with high-strength structural bolts of property classes 8.8 and 10.9.

DIN

DIN 671

1981

English

Bright round steel – Dimensions Permissible deviations – according to ISO tolerance zone h9

This standard applies to bright round steel of nominal diameters from 1 to 150 mm, made of the steels listed in clause 5. Details as to finish and lengths to be delivered are given in clause 6.