ASME B18.2.8
CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS
English
1999
0.000
Detailed Information
This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
Download File
(Log in to download spec.)
Check out other specifications
1977
English
Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods
This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.
1983
English
Plain washers – Extra large series – Product grade C
This International Standard lays down the specification for plain washers of product grade C with large outside diameter, preferable for bolts, screws and nuts in wood constructions, with thread sizes from M 5 to M 36 inclusive.
2012
English
Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes t...
2006
English
Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels – English version of DIN EN 10083-2:2006-10
This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: — semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1), — bars (see NOTE 2 in EN 10083-1:2006, Clause 1), — rod, — wide flats, — hot-rolled ...
1992
English
Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735
This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
2002
English
NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B
MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UNS S31700) AND 347 (UNS S34700), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. BRASS, ALLOY 462 (UNS C462...