ASME B18.5.2.3M

ROUND HEAD SQUARE NECK BOLTS WITH LARGE HEAD [METRIC SERIES]

English 1998

0.000

Detailed Information

This standard covers the complete general and dimensional data for metric series round head square neck bolts with large head recognized as American National Standard.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 918

1979

English

Fasteners – Terminology – Spelling of terms – Abbreviations

This standard applies to fasteners as described in clause 2 and specifies terms for them, terms for the most important characteristics of the parts and their abbreviations. When specifying […]

DIN

DIN 1681

1985

English

Cast steels for general engineering purposes – Technical delivery conditions

1.1 This standard applies to the grades of cast steel listed in table 1 with specified minimum values for the mechanical properties at ambient temperature. The castings made from these stee […]

JIS

JIS B 0123

1999

English

Designation system for screw threads

This Japanese Industrial Standard specifies designation for screw threads used in the Standards referring the principle of screw thread and the Standards referring the products having screw thread.

ISO

ISO 4755

1983

English

Fasteners – Thread undercuts for external metric ISO threads

This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an und […]

DIN

DIN 127

1970

English

Spring Lock Washers Barbed or Plain with Rectangular Cross-section

The surface of the spring lock washers must be smooth and free from scale and burr. The spring lock washers must be coiled without kinks and their outer edges must be sharp or at the most l […]

ISO

ISO 7051

1983

English

Cross recessed raised countersunk (oval) head tapping screws

This International Standard specifies the characteristics of cross recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

DIN

DIN 124

1993

English

Steel round head rivets with nominal diameters from 10 to 36 mm

This standard specifies dimensions of steel round head rivets with nominal diameters from 10 to 36 mm.

DIN EN

DIN EN 22341

1992

English

Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341

This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.

ASTM

ASTM A449

1993

English

Standard Specification for Quenched and Tempered Steel Bolts and Studs

1.1 This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required. […]