IFI-544

METRIC ROUND HEAD RIBBED NECK BOLTS

English 1998
0.000
IFI
Detailed Information

This standard covers the complete general and dimensional data for metric series round head ribbed neck bolts in sizes M5 thru M14, intended for general engineering applications.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0218
1980
English

Limit of sizes and tolerances for metric trapezoidal screw threads

This Japanese Industrial Standard specifies limit of sizes and tolerances for metric trapezoidal screw threads specified in JIS B 0216. The limit of sizes and tolerances due to this standard d [...]
ISO
ISO 7045
2011
English

Pan head screws with type H or type Z cross recess — Product grade A

This International Standard specifies the characteristics of pan head screws of product grade A, with threads from M1,6 to M10 inclusive, and with type H or type Z cross recess. If, in special [...]
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall be p [...]
BS EN
BS EN 10025-2
2004
English

Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat [...]
Custom
John Deere | JDM F15
2014
English

Specification for Electroplated Zinc Coatings on Fasteners

JDM F15 specifies requirements for electroplated zinc coatings for fasteners made of steel. JDM F15 applies primarily to electroplated coatings on threaded fasteners, non-threaded fasteners, an [...]
ASME
ASME B18.5.2.3M
1998
English

ROUND HEAD SQUARE NECK BOLTS WITH LARGE HEAD [METRIC SERIES]

This standard covers the complete general and dimensional data for metric series round head square neck bolts with large head recognized as American National Standard.
DIN
DIN 6884
1956
English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reproduced [...]
DIN EN
DIN EN 26157-3
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to special requirements (ISO 6157 -3 : 1988) (English version of DIN EN 26 157 Part 3)

This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts. screws and studs with - nominal [...]