IFI-534

METRIC BEVELED WASHERS

English 1999
0.000
IFI
Detailed Information

This standard covers metric steel beveled washers, in nominal sizes 12 thru 36 mm, intended for use with American Standard beams and channels in structural applications to compensate for the lack of parallelism where an outer face of the members to be joined has a slope approximately 1:6 with respect to a plane normal to the bolt axis.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6903
1990
English

Plain washers for tapping screw and washer assemblies

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.
ANSI
ANSI B18.2.3.2M
1995
English

METRIC FORMED HEX SCREWS

1.1 This standard covers the complete general and dimensional data for metric formed hex screws recognized as American National Standard. Formed hex screws are cold formed products with fully u [...]
DIN
DIN 78
2001
English

Bolt end protrusions

This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13 [...]
DIN
DIN 440
2001
English

Washers with square hole for use in timber constructions

This standard specifies dimensions and technical delivery conditions for washers with square hole, with extra large outside diameter, of product grade C, designed for use with bolt/nut assembli [...]
ANSI
ANSI B18.2.3.6M
1995
English

METRIC HEAVY HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
JIS
JIS B 0202
1999
English

Parallel pipe threads

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel inter [...]
ASTM
ASTM F2280
2008
English

“TWIST OFF” TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES, STEEL, HEAT TREATED, 150 KSI MINUMUM TENSILE STRENGTH

1.1 This specification covers two types of heat treated, steel, tension control bolt-nut-washer assemblies, also referred to as "sets," having a tensile strength of 150 to 173 ksi. These assemb [...]
ASME ANSI
ASME/ANSI B18.3.5M
1993
English

METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as Am [...]
SAE
SAE J531
2020
English

Automotive Pipe, Filler, and Drain Plugs

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automoti [...]