IFI-117

PULL THROUGH MANDREL BLIND RIVETS

English 2008
0.000
IFI
Detailed Information

This standard establishes the dimensional, mechanical, and performance requirements for inch series pull through mandrel blind rivets suitable for use in engineering assemblies where load transmitting capability by the rivet is a design requirement. A metric series counterpart standard is in existence under designation IFI-520.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 551
1972
English

Slotted Set Screws with Chamfered Ends

Compared with the April 1956 issue, the following amendments and additions should be noted: a) In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M [...]
IFI
IFI-553
1999
English

METRIC DRIVE PIN BLIND RIVETS

This standard establishes the requirements for metric drive pin blind rivets suitable for use in joining the component parts of an assembly.
DIN
DIN 6330
1991
English

Hexagon nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in co [...]
Others
BS ISO 1891
2009
English, French, Russian

Fasteners – Terminology

This International Standard provides translation guidance for terms commonly used to describe fasteners. This International Standard lays down the terminology of fasteners in English, French an [...]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of b [...]
BS EN
BS EN 10027-1
2016
English

Designation systems for steels Part 1: Steel names

This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, [...]
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]
BS EN
BS EN 12163
2011
English

Copper and copper alloys — Rod for general purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced [...]
DIN
DIN 6799
1981
English

Lock washers (retaining washers) for shafts

Lockwashers within the context of this standard are retaining washers for the axial retention of components on shafts. They are inserted radially in grooves and enclose the groove base under sp [...]