IFI-134

MULTI-GRIP FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

English 2008
0.000
IFI
Detailed Information

This standard establishes the dimensional, mechanical and performance requirements of multi-grip flush break, positive lock pull mandrel self-plugging blind rivets suitable for use in joining the component parts of assemblies of varying grip range where structural integrity is a design requirement.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B1.20.5
2004
English

GAGING FOR DRYSEAL PIPE THREADS (INCH)

The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inch [...]
DIN EN
DIN EN 28676
1992
English

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diame [...]
DIN
DIN 529
1986
English

Masonry and foundation bolts

This standard specifies the characteristics of M 8 to M 72 X 6 masonry and foundation bolts. They are designed for use in masonry, concrete foundations and the like. The shape of the shank is o [...]
ASTM
Abstract of ASTM B695
2000
English

COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL

1.1 This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 10 [...]
DIN
DIN 1816
1971
English

Round Nut with Set Pin Holes Inside – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Part 4
DIN
DIN 97
1986
English

Slotted countersunk (flat) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]
JIS
JIS B 1012
1986
English

Cross recesses for screws

This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, herein [...]
ASTM
ASTM F436M
1993
English

Standard Specification for Hardened Steel Washers [Metric]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]