IFI-505
METRIC BREAK MANDREL BLIND RIVETS
English
1999
0.000
Detailed Information
This standard establishes the dimensional, mechanical, and performance requirements of metric break mandrel blind rivets
suitable for use in joining the component parts of an assembly.
Download File
(Log in to download spec.)
Check out other specifications
1998
English
Hexagon nuts with flange (ISO/DIS 4161 : 1996, modified) English version of DIN EN 1661
This European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M 16 and product grade B for threads above M16 and with property classes 8, 10, 12 and A2-70.
2002
English
STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS
1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in. nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.
1995
English
QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURERS, DISTRIBUTORS, AND TESTING LABORATORIES
1-1.1 Part 1 contains the definitions used in this standard. Parts 2, 3, and 4 contain the requirements necessary to receive accreditation from The American Society of Mechanical Engineers (ASME) which must be met by manufacturers and alteration distributors of fasteners, non-alteration distribut...
2008
English
STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS
This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation ...
1967
English
Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application
For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible variations these must be agreed at the time of ordering. The dimension h is the maximum height of the key, di...