JIS B 1184
Wing bolts
English
1994
0.000
Detailed Information
This Japanese Industrial Standard specifies the metallic wing bolts (hereafter referred to as “bolts”), for general use.
Furthermore, these bolts have their heads (wing parts) firmly joined together with shanks by welding, caulking or other suitable methods, or those formed into one body.
Download File
(Log in to download spec.)
Check out other specifications
2014
English
Metallic materials — Brinell hardness test — Part 1: Test method
This part of ISO 6506 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines. For some specific materials and/or products, particular International Standards exist (e.g. ISO 4498) and make referenc...
2010
English
CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" denoting tensile strength and intended use, as follows: Grade | Description Grade A | Bolts and studs havi...
2001
English
Screw Threads – UNJ Profile, Inch
This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root of the external thread and with a minor diameter of both external and internal threads increased to provide ...
3.01
2008
German
Scheibenräder für Kraftwagen und Anhängefahrzeuge – Teil 2: Befestigungselemente für Bolzenzentrierung
Diese Norm gilt für Befestigungselemente von bolzenzentrierten Scheibenrädern aller Art an Kraftwagen und Anhängefahrzeugen.
2010
English
STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS
1 SCOPE This Standard describes a gage and procedure for checking bolt or screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable product standard. 2 COMPARISON WITH ISO 4759-1:2000 This Standard uses an adjustable gage, instead of pla...
1988
English
T-head bolts with square neck
This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specified in DIN 649), where T·head bolts with square neck are considered adequate detachable fasteners.