DIN 40401

Electro Screw Thread “Go” and “Not Go” Thread Ring & Plug Gauges

English 1960
0.000
DIN
Detailed Information

1) The manufacturing tolerance on h applies to an optional number of threads within gauge dimension b.
2) d3 = low limit of major diameter of bolt thread to DIN 40400
3) d1 = high limit of major diameter of bolt thread to DIN 40400
4) d2 = high limit of minor diameter of bolt thread to DIN 40400

thread ring gauge
Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assembli […]
Custom
John Deere | JDM F13
2015
English

Specification for Non-Electrolytically Applied Zinc Flake Coatings

1.1 JDM F13 specifies requirements for nine grades of corrosion resistant non-electrolytically applied zinc flake coatings on ferrous parts, with three levels of corrosion resistance, and three levels of lubricity. 1.2 JDM F13 coatings are specified in terms of ISO 10683. 1.3 JDM F13 coat […]
DIN
DIN 968
1994
English

Cross recessed pan head tapping screws with collar

This standard specifies requirements for ST 2,9 to ST 6,3 cross recessed pan head tapping screws with collar. See DIN 962 (or the standards referred to therein) for special screw types or finishes.
JIS
JIS B 0203
1999
English

Taper pipe threads

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc. The taper pipe thread of PT 3-1/ 2 and PT 7 to PT 12 in thread designation and the parallel pipe t […]
ASTM
Abstract of ASTM F880M
1990
English

STAINLESS STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS), sizes M1.6 through M24, having Property Classes A1·50 and A1·70. NOTE 1 - This specification is the metric companion of Specification F880.
IFI
IFI-525
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF METRIC ADHESIVE COATED PREVAILING- TORQUE SCREWS

This standard establishes a conformance test procedure for the performance of metric adhesive coated prevailing-torque screws in nominal thread diameters M3 thru M20 inclusive. Torque values given in this standard are conformance requirements for adhesive coated prevailing-torque screws […]