Check out other specifications
1998
German
Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997
Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
1989
English
Hexagon head bolts for structural steel bolting for supply with nut
This standard specifies requirements for M12 to M30 hexagon head bolts for supply with hexagon nut, assigned to product grade C, for use in structural steel bolting. These bolts shall always be used together with A type washers as specified in DIN 7989 (see clause 6).
2004
English
Hexalobular socket head screws
This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications than those listed in this Standard are required, they should be selected from existing JIS standards, for examp...
1995
English
Cone proof load test on nuts
This Standard specifies the properties of nuts with — nominal thread diameter, d, from 5 mm up to and including 39 mm, — product grades A and B, — property classes 8 to 12, under the conditions of the cone proof load test.
1999
English
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100°, CROSS RECESSED, UNC-2A AND UNF-2A
MATERIAL CODE: "A" BEFORE DASH NUMBER - ANODIZED, ALUMINUM ALLOY SCREW. "B" BEFORE DASH NUMBER - UNCOATED, BRASS SCREW. "BB" BEFORE DASH NUMBER - BLACK CHEMICAL FINISH, BRASS SCREW. "C" BEFORE DASH NUMBER - CLEANED AND DESCALED, CORROSION RESISTANT STEEL SCREW. "CB" BEFORE DASH NUMBER - CADMIUM P...