ASME B18.21.1

LOCK WASHERS

English 1999
0.000
ASME
Detailed Information

1.1.1 This standard covers the dimensions, physical properties and methods of testing for helical spring lock washers and tooth lock washers.

1.1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production items. Consumers should consult with manufacturers concerning the availability of products.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 580
1972
English

Lifting Eye Bolts

The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new edition of the Standard solely prescribes C 15, which is somewhat more ductile than St 34. The technical condi...
IFI
IFI-119
2008
English

STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation ...
NASM
NASM 51021
1998
English

SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING

SELF-LOCKING ELEMENT: (a) THE SELF-LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-F-18240. (b) FOR DESIGN AND USAGE LIMITATIONS, SEE MS15981. (c) LOCATION OF EFFECTIVE LOCKING AREA SHALL BE IN ACCORDANCE WITH MS15981. (d) MAXIMUM RING GAGE DIAMETER THAT LOCKING REGION OF SETSCREW MUST PASS THRU ...
DIN
DIN 40431
1970
English

Steel Conduit Thread – Thread Gauges

The "Go" thread ring gauge must be capable of being screwed by band, without the application or undue force, over the full length of the workpiece thread. The "Not go" thread ring gauge must be incapable or passing over the thread. The "Go" thread plug gauge must be capable of being screwed by h...
ASTM
Abstract of ASTM F912M
1997
English

ALLOY STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M 1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 Property Class 45H.
IFI
IFI-110/550
1999
English

BLIND RIVETS GLOSSARY OF TERMS

This glossary presents preferred nomenclature and definitions of terms relating to blind rivets. It is intended that this glossary serve as a guide to users and producers to assist them toward the use of a single system of terminology for the characteristics and properties of blind rivets and ot...