QQ-Z-325C

ZINC COATING, ELECTRODEPOSITED, REQUIREMENTS FOR

English 1976

0.000

Detailed Information

1.1 Scope. This specification covers the requirements for electrodeposited zinc coatings. The terms ” coating” and “plating” are used interchangeably throughout the specification.
1.1.1 Federal specifications do not include all types, classes, grades, and sizes of the commodities indicated by the titles of the specifications, or which are commercially available, but are intended to cover the types, etc., for which are suitable for Federal Government requirements.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 6880

1975

English

Bright steel for key bars – Dimensions, limit deviations, mass

This Standard applies to bright key steel in bars of square, rectangular or flat-rectangular cross-section in the nominal dimensions indicated in Tables 1 and 2 and in the steel specified in Section 6. This Standard does not apply to bright flat steel (see DIN 174) and bright square steel (see D...

ISO

ISO/R 1051

1969

English

RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)

This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.

ISO

ISO 7042

2012

English

Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.

JIS

JIS B 0212

1973

English

Limits of sizes and tolerances for unified fine screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.

DIN EN ISO

DIN EN ISO 1101

2006

German

Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Tolerierung von Form, Richtung, Ort und Lauf (ISO 1101:2004)

Diese Internationale Norm enthält die grundlegende Information für die geometrische Tolerierung von Werkstücken. Sie ist die Ausgangsbasis und beschreibt die Grundlagen für die Form- und Lagetolerierung. ANMERKUNG Es gibt verschiedene Normen, auf die im Abschnitt 2 und in Tabelle 2 hingewies...

ISO

ISO 898-7

1992

English

Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance with ISO 898-1. The test applies to bolts and screws with thread less than M3 for which no breaking...