DIN EN ISO 1234
Split pins
English
1998
0.000
Detailed Information
This International Standard specifies the characteristics of split pins.
Download File
(Log in to download spec.)
Check out other specifications
1975
English
Bright steel for key bars – Dimensions, limit deviations, mass
This Standard applies to bright key steel in bars of square, rectangular or flat-rectangular cross-section in the nominal dimensions indicated in Tables 1 and 2 and in the steel specified in Section 6. This Standard does not apply to bright flat steel (see DIN 174) and bright square steel (see D...
1969
English
RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)
This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.
2012
English
Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.
1973
English
Limits of sizes and tolerances for unified fine screw threads
This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.
2006
German
Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Tolerierung von Form, Richtung, Ort und Lauf (ISO 1101:2004)
Diese Internationale Norm enthält die grundlegende Information für die geometrische Tolerierung von Werkstücken. Sie ist die Ausgangsbasis und beschreibt die Grundlagen für die Form- und Lagetolerierung. ANMERKUNG Es gibt verschiedene Normen, auf die im Abschnitt 2 und in Tabelle 2 hingewies...
1992
English
Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance with ISO 898-1. The test applies to bolts and screws with thread less than M3 for which no breaking...