ASME B18.21.1
WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)
English
2009
0.000
Detailed Information
This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), and plain washers (# 0 through 3 in.).
Download File
(Log in to download spec.)
Check out other specifications
1992
English
Dimensions and quality of conical disc springs
This standard specifies requirements for the materials, dimensions, tolerances, and permissible stresses for conical disc springs. It includes graphs showing the permissible relaxation and the endurance life of such springs, as a function of stress. The minimum requirements specified here are in...
2009
English
WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)
This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), and plain washers (# 0 through 3 in.).
1981
English
Circlips (retaining rings) for shafts – Normal type and heavy type
Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spring retention in grooves and are suitable for the transmission of axial forces.
1956
English
Telecommunications Engineering – Contact Rivets – Solid or Clad – Technical Conditions of Delivery
These conditions of delivery apply to solid and clad contact rivets according to DIN 46240 Sheet 1 made of contact materials which can be shaped by nonoutting methods, e.g. silver , and contact carrier materials, e.g. copper for electrical purposes. Subject to agreement between manufacturer and u...
1999
English
Hexagon head bolts — Product grades A and B
This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is shorter and product grade B for threads over M24 or nomin...
2005
English
Hexagon nuts with flange
This Standard specifies the characteristics of hexagon nuts with flange. If, in special cases, specifications other than those listed in this Standard are required, they should be selected from existing standards, for example JIS B 0205-2, JIS B 0209-2, JIS B 1052 and JIS B 1054-2. NOTES 1 Hex...