ASTM F594
STAINLESS STEEL NUTS
English
2009
0.000
Detailed Information
This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

Download File
(Log in to download spec.)
Check out other specifications
1983
English
Fasteners – Bolts, screws and studs – Split pin holes and wire holes
This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriate product standard.
2015
English
High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
This European Standard specifies, together with EN 1 4399-1 and EN 1 4399-2, hardened and tempered chamfered plain washers with chamfer intended for bolting assemblies with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive. Washers according...
1983
English
Plain washers – Large series – Product grades A and C
This International Standard lays down the specification for plain washers of product grades A and C with outside diameter three times nominal size (nominal thread diameter), preferable for hexagon bolts, screws and nuts with width across flats according to ISO 272, with thread sizes from M 3 to M...
2010
English
SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering gaging procedures, formulas on which dimensional data are based, and a specification to assist in identify...
5.01
2002
English
UNIFIED INCH SCREW THREADS (UN AND UNR THREAD FORM)
This standard specifies the thread form, series, class, allowance, tolerance, and designation for Unified screw threads. (In order to emphasize that Unified screw threads are based on inch modules, they may be denoted Unified inch screw threads.) Several variations in thread form have been develo...
2000
English
Plain washers – Normal series – Product grade C
This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers of hardness class 100 HV are suitable for -hexagon bolts and sc...