BS EN 20898-2
Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread
English
1994
0.000
Detailed Information
This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lower temperature.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
METRIC HEAVY HEX NUTS
1.1 This standard covers the complete general and dimensional data for metric heavy hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described herein...
2010
English
CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" denoting tensile strength and intended use, as follows: Grade | Description Grade A | Bolts and studs havi...
2001
English
ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in inch-pound...
1987
English
Metric trapezoidal screw threads
This Japanese Industrial Standard specifies the combined nominal diameters and pitches, designation of screw threads, basic profiles, formulae and basic dimensions of the metric trapezoidal screw threads for general use.
1986
English
Slotted set screws with flat point (modified version of ISO 4766, 1983 edition)
This standard specifies the characteristics of M 1 to M 12 slotted set screws with flat point , assigned to product grade A. Where, for special applications, the screws are to meet requirements differing from those specified in the present standard, e.g. in respect of material (hardness class) or...
1984
English
Hexagon nuts for structural bolting – Style 2, hot-dip galvanized (oversize tapped) – Product grade A – Property class 9
This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions, property class 9 hot-dip galvanized in accordance with ISO 1461 and tapped oversize to tolerance class 6AX. This International Standard covers product grade A nuts in thread diameters from M10 up t...