2000
English
STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED
This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, [...]
1997
English
NUT, SELF-LOCKING, 250° F, 450° F, AND 800° F
This specification covers self-locking nuts for use in temperatures of 250° F, 450° F, and 800° F (see 6.1).
1997
English
FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM
This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, [...]
2000
English
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
This specification covers two types of heavy phosphate coating for ferrous metals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when specified [...]
1999
English
COATING, OXIDE, BLACK, FOR FERROUS METALS
This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary [...]
1993
English
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
This specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectural applications.